What is the difference between a System Specification and a Software Specification?
Very often we find that companies do not understand the difference between a System specification and a Software Specification. Important issues are not defined up front and Mechanical, Electronic and Software designers do not really know what their requirements are.
The following is a high level list of requirements that should be addressed in a System Specification:
- Define the functions of the system
- Define the Hardware / Software Functional Partitioning
- Define the Performance Specification
- Define the Hardware / Software Performance Partitioning
- Define Safety Requirements
- Define the User Interface (A good user’s manual is often an overlooked part of the System specification. Many of our customers haven’t even considered that this is the right time to write the user’s manual.)
- Provide Installation Drawings/Instructions.
- Provide Interface Control Drawings (ICD’s, External I/O)
One job of the System specification is to define the full functionality of the system. In many systems we work on, some functionality is performed in hardware and some in software. It is the job of the System specification to define the full functionality and like the performance requirements, to set in motion the trade-offs and preliminary design studies to allocate these functions to the different disciplines (mechanical, electrical, software).
Another function of the System specification is to specify performance. For example, if the System is required to move a mechanism to a particular position accurate to a repeatability of ± 1 millimeter, that is a System’s requirement. Some portion of that repeatability specification will belong to the mechanical hardware, some to the servo amplifier and electronics and some to the software. It is the job of the System specification to provide that requirement and to set in motion the partitioning between mechanical hardware, electronics, and software. Very often the System specification will leave this partitioning until later when you learn more about the system and certain factors are traded off (For example, if we do this in software we would need to run the processor clock at 40 mHz. However, if we did this function in hardware, we could run the processor clock at 12 mHz). [This implies that a certain level of research or even prototyping and benchmarking needs to be done to create a System spec. I think it is useful to say that explicitly.]
However, for all practical purposes, most of the systems we are involved with in small to medium size companies, combine the software and the systems documents. This is done primarily because most of the complexity is in the software. When the hardware is used to meet a functional requirement, it often is something that the software wants to be well documented. Very often, the software is called upon to meet the system requirement with the hardware you have. Very often, there is not a systems department to drive the project and the software engineers become the systems engineers. For small projects, this is workable even if not ideal. In this case, the specification should make clear which requirements are software, which are hardware, and which are mechanical.
原文出處： How to write a software requirements specification
